View 74VHC373MTC_1069437.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74VHC373 Octal D-Type Latch with 3-STATE Outputs
February 1993 Revised April 2005
74VHC373 Octal D-Type Latch with 3-STATE Outputs
General Description
The VHC373 is an advanced high speed CMOS octal Dtype latch with 3-STATE output fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. This 8-bit D-type latch is controlled by a latch enable input (LE) and an output enable input (OE). The latches appear transparent to data when latch enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is LATCHED. When the OE input is HIGH, the eight outputs are in a high impedance state. An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.
Features
s High Speed: tPD
5.0 ns (typ) @ VCC VNIL
5V
s High Noise Immunity: VNIH s Low Noise: VOLP
28% VCC (Min)
s Power Down Protection is provided on all inputs
0.6V (typ) 4 PA (Max) @ TA 25qC
s Low Power Dissipation: ICC
s Pin and Function Compatible with 74HC373
Ordering Code:
Order Number 74VHC373M 74VHC373SJ 74VHC373MTC 74VHC373N Package Number M20B M20D MTC20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B.
Logic Symbol
IEEE/IEC
Connection Diagram
(c) 2005 Fairchild Semiconductor Corporation
DS011555
www.fairchildsemi.com
74VHC373
Pin Descriptions
Pin Names D0-D7 LE OE O0-O7 Description Data Inputs Latch Enable Input Output Enable Input 3-STATE Outputs
Truth Table
Inputs LE X H H L
H L Z X O0
Outputs Dn X L H X On Z L H O0
OE H L L L
HIGH Voltage Level LOW Voltage Level High Impedance Immaterial Previous O0 before HIGH-to-LOW transition of Latch Enable
Functional Description
The VHC373 contains eight D-type latches with 3-STATE standard outputs. When the Latch Enable (LE) input is HIGH, data on the Dn inputs enters the latches. In this condition the latches are transparent, i.e., a latch output will change state each time its D input changes. When LE is LOW, the latches store the information that was present on the D inputs a setup time preceding the HIGH-to-LOW transition of LE. The 3-STATE standard outputs are controlled by the Output Enable (OE) input. When OE is LOW, the standard outputs are in the 2-state mode. When OE is HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the latches.
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
74VHC373
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC ) DC Input Voltage (VIN) DC Output Voltage (VOUT) Input Diode Current (IIK) Output Diode Current DC Output Current (IOUT) DC VCC /GND Current (ICC ) Storage Temperature (TSTG) Lead Temperature (TL) (Soldering, 10 seconds) 260qC
0.5V to 7.0V 0.5V to 7.0V 0.5V to VCC 0.5V 20 mA r20 mA r25 mA r75 mA 65qC to 150qC
Recommended Operating Conditions (Note 2)
Supply Voltage (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) VCC VCC 3.3V r 0.3V 5.0 r 0.5V 0 a 100 ns/V 0 a 20 ns/V 2.0V to 5.5V 0V to 5.5V 0V to VCC
40qC to 85qC
Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.0 3.0 5.5 2.0 3.0 5.5 2.0 3.0 4.5 3.0 4.5 VOL LOW Level Output Voltage 2.0 3.0 4.5 3.0 4.5 IOZ IIN ICC 3-STATE Output Off-State Current Input Leakage Current Quiescent Supply Current 0 5.5 5.5 5.5 1.9 2.9 4.4 2.58 3.94 0.0 0.0 0.0 0.1 0.1 0.1 0.36 0.36 2.0 3.0 4.5 Min 1.50 0.7 VCC 0.50 0.3 VCC 1.9 2.9 4.4 2.48 3.80 0.1 0.1 0.1 0.44 0.44 V IOL IOL VIN VOUT VIN VIN VIH or VIL VCC or GND 5.5 or GND VCC or GND 4 mA 8 mA V V VIN VIH or VIL IOH IOH IOL V TA
25qC
Typ Max
TA
40qC to 85qC
Max
Min 1.50 0.7 VCC
Units V
Conditions
0.50 0.3 VCC
V VIN VIH or VIL IOH
50 PA
4 mA 8 mA
50 PA
r0.25 r0.1
4.0
r2.5 r1.0
40.0
PA PA PA
Noise Characteristics
Symbol VOLP (Note 3) VOLV (Note 3) VIHD (Note 3) VILD (Note 3) Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage VCC (V) 5.0 5.0 5.0 5.0 TA Typ 0.6
25qC
Limits 0.9
Units V V V V CL CL CL CL
Conditions 50 pF 50 pF 50 pF 50 pF
0.6
0.9
3.5 1.5
Note 3: Parameter guaranteed by design.
3
www.fairchildsemi.com
74VHC373
AC Electrical Characteristics
Symbol tPLH tPHL Parameter Propagation Delay Time (LE to On) 5.0 r 0.5 tPLH tPHL Propagation Delay Time (D to On) 5.0 r 0.5 tPZL tPZH 3-STATE Output Enable Time tPLZ tPHZ tOSLH tOSHL CIN COUT CPD 3-STATE Output Disable Time Output to Output Skew Input Capacitance Output Capacitance Power Dissipation Capacitance
Note 4: Parameter guaranteed by design. tOSLH |tPLH max t PLH min |; tOSHL |tPHL max tPHL min| Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) CPD * VCC * fIN ICC/8 (per Latch). The total CPD when n pcs. of the Latch operates can be calculated by the equation: CPD(total) 14 13n.
VCC (V) 3.3 r 0.3 Min
TA
25qC
Typ 7.0 9.5 4.9 6.4 7.3 9.8 5.0 6.5 7.3 9.8 5.5 7.0 9.5 6.5 Max 11.0 14.5 7.2 9.2 11.4 14.9 7.2 9.2 11.4 14.9 8.1 10.1 13.2 9.2 1.5 1.0 4 6 27 10
TA
40qC to 85qC
Max 13.0 16.5 8.5 10.5 13.5 17.0 8.5 10.5 13.5 17.0 9.5 11.5 15.0 10.5 1.5 1.0 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Min
Units ns ns
Conditions CL CL CL CL CL CL CL CL RL 1 k: CL CL CL CL RL 1 k: CL CL (Note 4) VCC VCC Open 5.0V CL CL 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 50 pF 50 pF 50 pF 50 pF
3.3 r 0.3
ns
3.3 r 0.3 5.0 r 0.5 3.3 r 0.3 5.0 r 0.5 3.3 r 0.3 5.0 r 0.5
ns ns ns ns pF pF pF
(Note 5)
AC Operating Requirements
Symbol tW(H) tS tH Parameter Minimum Pulse Width (LE) Minimum Set-Up Time Minimum Hold Time VCC (V) 3.3 r 0.3 5.0 r 0.5 3.3 r 0.3 5.0 r 0.5 3.3 r 0.3 5.0 r 0.5 Min 5.0 5.0 4.0 4.0 1.0 1.0 TA
25qC
Typ Max
TA
40qC to 85qC
Max 5.0 5.0 4.0 4.0 1.0 1.0
Min
Units ns ns ns
www.fairchildsemi.com
4
74VHC373
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B
5
www.fairchildsemi.com
74VHC373
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
www.fairchildsemi.com
6
74VHC373
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20
7
www.fairchildsemi.com
74VHC373 Octal D-Type Latch with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com

▲Up To Search▲

Price & Availability of 74VHC373MTC

	To Download 74VHC373MTC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .